3.2
Loading mechanism assembly
3.2.1 Remove the clamper base (See figure 1, figure 2)
(1) The part a on the reverse side of a mechanism assembly is
made to slide in the direction of an arrow with a driver etc.
(A tray ejects a few.)
(2) Remove the two screws A attaching the clamper base.
(3) After making a clamper base slide in the direction of an ar-
row, it raises upward and removes.
(4) A tray is removed.
Part a
Fig.1
A
A
Fig.2
Clamper base
(No.YD058)1-11