THE STATUS MONITOR
The Status Monitor software is distinct from and installed separately
from the driver software.
For reliable operation of the Status Monitor, ensure that the USB cable
is of length 2m maximum.
The Status Monitor provides a readable indication of the printer status
as displayed on the indicator LEDs on the Status Panel
Status Panel" on page 9.)
(listed at the end of this chapter) to set printer parameters such as
paper size etc.
USING THE STATUS MONITOR
You are advised to refer to the extensive on-line help as required when
using the Status Monitor.
Viewing the status of the printer, and viewing or changing the printer
menu settings are carried out as follows:
1.
Click on [Start], [All Programs] and select Okidata|OKI
C3100|Printer Name Status Monitor. The current printer status
is shown.
NOTE
and allows you to access the printer menus
NOTE
THE STATUS MONITOR > 35
(See "The