Setup Tab - Oki C3100 User Manual

When you click Properties a new window opens which contains a
short list of the printer settings available in the driver, which you can
choose for this document. The settings available from within your
application are only those which you may want to change for specific
applications or documents. Settings you change here will usually only
last for as long as the particular application program is running.

SETUP TAB

When you click the Properties
button from your application's Print
dialogue, the driver window opens
to allow you to specify your printing
preferences for the current
document.
1. Paper size should be the
same as the page size of
your document (unless you
wish to scale the printout to
fit another size), and should
also be the same as the size
of paper you will feed into the printer.
2.
You can choose the source of the paper to feed, which may be
Tray 1 (the standard paper tray) or the multi purpose feeder.
You can also click on the appropriate part of the screen graphic
to select your preferred tray.
3. The setting for paper weight should match the type of paper on
which you intend to print.
4.
A variety of document finishing options can be selected, such
as normal one page per sheet, or N-up (where N can be a
maximum of 16) for printing scaled down pages at more than
one page per sheet.
Poster printing will print large pages as tiles spread over
multiple sheets.
5. If you have changed some printing preferences before and
saved them as a set, you can recall them to avoid having to set
them individually each time you need them.
PRINTER SETTINGS IN WINDOWS > 22
1
2
3
4
5
6