Setup Tab - Oki C5100n User Manual

SETUP TAB

When you click the Properties button
from your application's Print
dialogue, the driver window opens to
allow you to specify your printing
preferences for the current
document.
1.
Paper size should be the
same as the page size of your
document (unless you wish to
scale the printout to fit
another size), and should
also be the same as the size of paper you will feed into the
printer.
2. You can choose the source of the paper to feed, which may be
Tray 1 (the standard paper tray), Tray 2 (if you have the
optional 2nd paper tray installed) or the multipurpose feeder.
You can also click on the appropriate part of the screen
graphic to select your preferred tray.
3. A variety of document finishing options can be selected, such
as normal one page per sheet, or N-up (where N can be any
number up to 16) for printing scaled down pages at more than
one page per sheet. Booklet printing prints two pages per
sheet on each side of the paper so that when folded they make
up a booklet. Booklet printing requires the duplex unit to be
installed in your printer.
Poster printing will print large pages as tiles spread over
multiple sheets.
4.
For two sided printing, you can choose to flip the page by the
long edge or the short edge. Of course, this requires that a
duplex unit be installed in your printer.
5. If you have changed some printing preferences before and
saved them as a set, you can recall them to avoid having to set
them individually each time you need them.
6. A single on-screen button restores the default settings.
PRINTER SETTINGS IN WINDOWS > 18
1
2
3
4
5
6