Upnp - D-Link DIR-620 User Manual

Multifunction wireless router supporting g/2g, cdma, wimax with built-in 4-port switch

Hide thumbs Also See for DIR-620:

Table of Contents

DIR-620 Multifunction Wireless Router Supporting 3G/2G, CDMA, WiMAX

with Built-in 4-port Switch

User Manual

UPnP

On the Net > UPnP page you can enable the UPnP function.

UPnP is a set of networking protocols designed for automatic configuration of network devices. The

UPnP function performs automatic configuration of the device's parameters for network

applications requiring an incoming connection to the router.

If you want to manually specify all parameters needed for network applications, deselect the UPnP

checkbox and click the Change button.

If you want to enable the UPnP function in the router, select the UPnP checkbox, select an

interface for which the router's parameters will be automatically configured from the Interface

drop-down list, and click the Change button.

Figure 51. The Net > UPnP page.

Page 67 of 98

Configuring via Web-based Interface

Table of Contents