Brickcom NR-1604 Quick Installation Manual page 23

The Recording Buffer allows users to set the pre-alarm and post-alarm buffer. These
buffers will determine how much video will be recorded before and after an alarm has
been triggered. The Pre-Alarm Buffer range is from 0 to 3 seconds and the Post-Alarm
Buffer range is from 5 to 30 seconds.
Recording Frame Rate allows users to set different frame rate for each recording type
and camera. The recording types include continuous, schedule, event, and manual.
Use the drop-down menu and select one of the predefined frame rates. The
predefined frame rates include 1, 5, 10, 15, 20, and full.
Camera Recording Setting allows users to enable continuous, schedule, or event
recording on any channel.
23