Table of Contents
Advertisement
TROUBLESHOOTING & TIPS
TROUBLE PAIRING A DEVICE
If you are having trouble pairing a device. Try these steps:
1. Power down, and then power up your ARC console.
2. Press and hold the green Call button for exactly 5 seconds, and then release. You will hear a beep on the Bluetooth channel.
3. You will notice the red Drop button will now blink on your console. This means it is ready to connect. In your cell phone, tablet, or
other device, turn on the Bluetooth option. You will have 10 minutes to pair. After the 10 minutes, it will still flash, but you will need to
start back at step 1 to pair.
4. In your device settings, select Search for devices. This step is different depending on the device you are connecting.
5. Your device should find ARRAKIS 1.X (X = the firmware version). Select to connect.
6. Now that your device is paired, the red Drop button should now be constant lit.
USEFUL TIPS
*It is always recommended to have only one device connected at a time. If your station will be consistently changing con-
nected devices, then it is recommended to unpair the device when you are done using it. That way it will be easier for the next user to
pair and connect their different device.
**As a note, not all devices will have full Bluetooth functionality. Some phones may connect for calls, but not be able to stream music,
and vice versa.
***If your studio is only using one device, then it isn't necessary to pair and re-pair the device every time you are using it. Rather, it
is more effective to connect (if not already connected) directly from the device's menu.
B L U E T O O T H
7.8
Hide quick links:
Advertisement
Table of Contents
