Table of Contents
Advertisement
The Control Room Monitor system
The Control Room Monitor system is the main audio monitoring system for the studio. It features an input selector switch and a vol-
ume level control. The output of the monitor system is connected to an external audio power amplifier and speakers. The level control
on the external amplifier should be set for the maximum sound level desired in the studio.
MONITOR MUTING
When the control room microphone is turned on (channel one), the monitor system will mute (audio is turned off) so that there will
not be feedback from the speakers to the microphone.
Note: channels 2-5 are selectable as mic channels and have jumpers to assign them to mute the monitor if those mics are also locat-
ed in the control room.
MONITOR SELECTOR SWITCH
This switch selects the audio source for the Monitor system.
1) AIR- this is usually an off air audio feed to monitor the actual transmitted signal
2) PGM- the main Program output bus from the console
3) AUD- a secondary Program bus that can be used for several purposes such as Recording
MONITOR VOLUME FADER
Sets the monitor level into the external audio amplifier and speaker.
O P E R A T I N G I N S T R U C T I O N S
MONITOR SELECTOR SWITCH
3.5
CONTROL ROOM
MONITOR LEVEL CONTROL
Hide quick links:
Advertisement
Table of Contents
