Table of Contents
Advertisement
User's Guide
1.3
The Four System LEDs
The Power LED
Below is how the LED would behave in different situations:
The Battery LED
Below is how the LED would behave in different situations:
The HDD LED
This LED would be lit when system is accessing the HDD drive.
The DTV LED
This LED would be lit when the DTV (Digital TV) power is powered on. For
detail on how to power on and power off the DTV module, please refer to
Chapter 1.12. For details on how to setup the Digital TV Tuner module, please
refer to Chapter 7.
Note:
The Four System LEDs are located on the front side of system unit. For exact
location, please refer to the Front View diagram in Chapter 1.2.
For more details on Standby and Hibernate, please refer to Power Options (of
Windows™ System) in the Control Panel of your Microsoft™ Windows™
operating system.
Off
On
Blinking
Purple
Blue
Off
Red Blinking
Red
System is powered off, or in Hibernate mode.
System is in full operation.
System is in Standby mode.
Battery pack is being recharged: fast-charge or pre-charge.
Battery pack is in full power capacity.
System is not connected to AC adapter.
Battery pack is consuming down to 10% level.
Battery pack error.
Before You Begin
Page 1-7
Advertisement
Table of Contents
