Table of Contents
Advertisement
Operation Confirmation
Refer to the Reference Manual for the AVHDD Mainte-
nance tools.
1. Double click "Special" in the Tool Box.
"Setup Panel" is displayed.
2. Double click "AV HDD" to display the "AV HDD
Maintenance tool" panel.
3. Click "disk configuration" to display the "Disk
Configuration" panel.
DISK Configuration Panel
4. The HDD model numbers are displayed in the "Disk
Configuration" panel.
Note: All HDD model numbers should be displayed in
blue.
No Display
• Confirm the SCSI cable connection between the
HDD-Box and main unit.
• If no problem is found with the connection, refer to
qualified service personnel.
Black Display
• Initialization of the HDD displayed in black (in the
"Disk Configuration" panel) is not possible.
In this case, refer to qualified service personnel.
21
Red Display
• Click on "Add to chain as Newdisk" for logical for-
matting.
Caution:
• It is important to make a back-up copy of HDDs, and
Windows 95. Backing up your files and disks
ensures that you won't lose information if the original
is lost or damaged.
• For backing up, 30 floppy disks are required.
Back-up of Windows 95
1. Format 29 floppy disks.
2. Click [EXIT], then click [Restart Windows].
3. Click [Start] and select [Programs] → [Accessories]
→ [System Tools Create System Disks].
4. Insert the floppy disk into the Floppy Disk Drive
according to the message.
5. Write WIN-0,1...28 on the labels of the backed-up
floppy disks.
Caution:
Only 1 set of back-up disks can be made.
Reloading Windows
1. Keep the 29 Windows 95 back-up disks ready.
2. Insert the [WIN-0] floppy disk into the FDD, and turn
the main power on.
3. Reload the floppy disks from [WIN-0] to [WIN-28].
Advertisement
Table of Contents
