Nv-Mi1 Mute Interface Adaptor - Nuvo Essentia NV-E6GMS-UK Installation Manual

NV-MI1 Mute Interface Adaptor (Fig. 51)
The Mute Interface is used in conjunction with System Mute input on the back of the Essentia amplifier. It acts as relay for a voltage
from up to two phone lines and two doorbell transformers. When a voltage is presented to the MI1, it sends a contact closure to the
Essentia System, which causes the system to mute momentarily. This is useful in allowing the telephone or doorbell to be heard
when audio is playing in any of the zones.
The NuVo NV-MI1 Mute Interface Module is designed to automatically mute any audio playing through the System's speakers when the
telephone or doorbell rings.
Fig. 51
5 6
FIXED VAR TRIG
ZONE
1
1
ZONE
2
ALLPORT CONNECTION
The MI1 connects to the NuVo amplifier using a standard
mono patch cable with a mini-plug on each end. Plug one
end into the MUTE input on the back of the amplifier
and the other end into the input on the front of the MI1.
MUTE INTERFACE
ADAPTER
NV-MI1
CONNECT TO
MUTE INPUT
IR OUTPUTS STATUS
2 3 4 5 6 SUM
NuVoNet
RS232
The back of the MI1 will accept up to two AC or
DC voltages from two different doorbell chimes.
This connection is done with two conductor wires
from the terminals on the doorbell chime to the
Doorbell A or Doorbell B inputs on the back of the
MI1. Polarity is not important for this connection.
A
DOORBELL 1
B
A
DOORBELL 2
B
Connect to Telephone RJ11
Line 1: Pins 3,4 Line 2: Pins 2,5
Model NV-MI1
Mute Interface Module
Up to two phone lines can be brought into the
RJ11 connection on the back of the MI1. The
voltage from the phone ringer will trigger the
NuVo System to mute.
35
1807
MUTE MODEL NV-E6GM
SIX SOURCE SIX ZONE
AUDIO DISTRIBUTION SYSTEM
NuVo Technologies LLC • Hebron, Kentucky USA
www.nuvotechnologies.com
LINK
RoHS
CO NF OR MS TO UL
ST D. 60 06 5 CE RT IF IE D
TO CAN /C SA STD . 100 ~24 0V 50~60 Hz 130W
30 33 118 C2 2. 2 No .6 00 65 :0 3 N1839
MADE IN CHINA