TV Ears 5.0 Speaker Quick Start Manual page 9

Coaxial Digital Installation
Step 2.3
This step is an alternative to Step 2 on page 3. This step will
explain how to connect the TV Ears transmitter to your television,
satellite, or cable box using an coaxial digital audio cord (not
included).
• If you cannot get to the back of your TV, you can also use these
instructions to install the system to your cable or satellite box.
• Be aware that the "Audio" ports on the front of your television are
typically "Audio In" ports and will not send audio to your headset.
1
Plug one end of the coaxial digital audio cord into the "Digital
Audio Out (Coaxial)" port on the back of the TV.
2
Plug the other end of the coaxial digital audio cord into the
port on the back of the transmitter labelled "Digital Audio
In". The correct port has a red border around it.
Digital Audio
Coaxial
• Your TV's audio settings may be set to "variable" or "fixed". If you
want to be able to control your TV volume level separate from your
TV Ears volume level, you will need to make sure your TV is set to
"fixed". Contact your TV manufacturer for assistance.
6