TV Ears 5.0 Speaker Quick Start Manual page 8

SCART Adapter Analog Installation
Step 2.2
This step is an alternative to Step 2 on page 3. This step will
explain how to connect the TV Ears transmitter to your television,
satellite, or cable box using a SCART adapter.
• If you cannot get to the back of your TV, you can also use these
instructions to install the system to your cable or satellite box.
1
Plug the single end of the audio cord into the port labelled
"Analog Audio In" on the back of the transmitter. The correct
port has a yellow border around it.
2
Plug the dual end of the audio cord (red and black ends) into
the red and white ports on the SCART adapter. Then plug
the SCART adapter into the port labelled "SCART" back of the
television, satellite, or cable box.
• Your TV's audio settings may be set to "variable" or "fixed". We
recommend that you set your audio settings to "fixed" for better
audio quality when using this installation option. If you want to be
able to control your TV volume level separate from your TV Ears
volume level, you will need to make sure your TV is set to "fixed".
Contact your TV manufacturer for assistance.
5
Analog Audio
3.5mm
SCART