Factory Default - Nevir NVR-2090DU Instruction Manual

4.1.7 Set Scan Area
The Set Scan Area menu is shown in figure(26).
Press UP or DOWN button to move and press ENTER button to confirm
your selection.
4.1.8 Change password
The Change Password menu is shown in figure(27).
Press UP or DOWN button to move and press ENTER button to confirm
your selection.
The Change Password menu allows you to change the default
password, the default value is 6666.
Input you new password using the numerical buttons on the remote
control.
Please note that your new password must contain 4 digits.

4.1.9 Factory Default

Factory Default
The
Press UP or DOWN button to move
confirm.
The Factory Default menu allows you to reset the settings
System setting -> Set ScanArea
>
OSD Language English
>
Sleep After No Sleep
> >
Screen Format 4:3PS
> >
TV Type PAL
Set Brightness > 2 >
> >
GMT Setting GMT+1
> >
Set ScanArea Germany
> >
Change Password Press OK
> >
Factory Default Press OK
Press Up/Down to move cursor
Press ENTER to pop List
Figure(26)
System setting -> Change Password
>
OSD Language English
>
Sleep After No Sleep
Old Password:
>
Screen Format 4:3PS
> >
TV Type PAL
Set Brightness > 2 >
> >
GMT Setting GMT+1
> >
Set ScanArea Germany
> >
Change Password Press OK
> >
Factory Default Press OK
Press Up/Down to move cursor
Press ENTER to pop List
Figure(27)
menu is shown in figure(28).
System setting -> Factory Default
OSD Language English
Sleep After No Sleep
>
Screen Format 4:3PS
Message Box
>
TV Type PAL
Reset to default!
>
Set Brightness 2
>
GMT Setting GMT+1
>
Set ScanArea Germany
>
Change Password Press OK
>
Factory Default Press OK
Press Up/Down to move cursor
Press ENTER to pop List
Figure(28)
18 18
Germany
England
France
Spain
Holand
Taiwan
and press ENTER button to
>
>
>
>
>
>
OK
>
Cancel
>