Nevir NVR-2090DU Instruction Manual page 65

4.1.4TV Type
The TV Type menu is shown in figure(23).
Press UP or DOWN button to move
confirm your selection.
The standard setting is used to set the signal input to your TV. There
are two different standards(PAL and NTSC) available on set top box.
If you are unsure which setting to use, consult the manufactures r ¡¯ user
manual for your television.
4.1.5 Set Brightness
The Brightness menu is shown in figure(24).
Press UP or DOWN button to move and press ENTER button to confirm
your selection.
4.1.6 GMT setting
The GMT setting menu is shown in figure(25).
Press UP or DOWN button to move and press ENTER button to confirm
your selection.
System setting -> TV Type
>
OSD Language English
>
Sleep After No Sleep
> >
Screen Format 4:3PS
> >
TV Type PAL
Set Brightness > 2 >
> >
GMT Setting GMT+1
> >
Set ScanArea Germany
> >
Change Password Press OK
Factory Default > Press OK >
Press Up/Down to move cursor
Press ENTER to pop List
Figure(23)
System setting -> Set Brightness
>
OSD Language English
>
Sleep After No Sleep
> >
Screen Format 4:3PS
> >
TV Type PAL
> >
Set Brightness 2
> >
GMT Setting GMT+1
> >
Set ScanArea Germany
> >
Change Password Press OK
> >
Factory Default Press OK
Press Up/Down to move cursor
Press ENTER to pop List
Figure(24)
System setting -> GMT setting
>
OSD Language English
>
Sleep After No Sleep
> >
Screen Format 4:3PS
> >
TV Type PAL
Set Brightness > 2 >
> >
GMT Setting GMT+1
> >
Set ScanArea Germany
> >
Change Password Press OK
Factory Default > Press OK >
Press Up/Down to move cursor
Press ENTER to pop List
Figure(25)
17 17
and press ENTER button to
NTSC
PAL
AUTO
0
2
4
6
8
10
12
GMT-5
GMT-4
GMT-3
GMT-2
GMT-1
GMT
GMT+1