Kenwood KMC010 Instructions Manual page 4

know your Kenwood kitchen machine
before using your Kenwood appliance
Read these instructions carefully and retain for future reference.
G
Remove all packaging and any labels.
G
safety
Switch off and unplug before fitting or removing tools/attachments, after use and before cleaning.
G
Keep your fingers away from moving parts and fitted attachments.
G
Never leave the machine on unattended.
G
Never use a damaged machine. Get it checked or repaired: see 'service and customer care'.
G
Never operate the mixer with the head in the raised position.
G
Never let the cord hang down where a child could grab it.
G
Never let the power unit, cord or plug get wet.
G
Never use an unauthorised attachment or more than one attachment at once.
G
Never exceed the maximum capacities.
G
When using an attachment, read the safety instructions that come with it.
G
Take care when lifting this appliance as it is heavy. Ensure the head is locked and that the bowl, tools,
G
outlet covers and cord are secure before lifting.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
G
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
G
Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the
G
appliance is subject to improper use, or failure to comply with these instructions.
before plugging in
important - UK only Make sure your electricity supply is the same as the one shown on the underside of your machine.
G
The wires in the cord are coloured as follows:
G
Blue = Neutral, Brown = Live.
The appliance must be protected by a 13A approved (BS1362) fuse.
G
For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover
G
is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover
is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer
(see Service).
If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard
G
may arise if an unwanted non-rewireable plug is inadvertently inserted into a 13A socket outlet.
This appliance conforms to EC directive 2004/108/EC on Electromagnetic Compatibility and EC
G
regulation no. 1935/2004 of 27/10/2004 on materials intended for contact with food.
before using for the first time
Remove all packaging.
1
Wash the parts: see 'care and cleaning'.
2
Push excess cord into the cord stowage compartment at the back of the machine.
3
4