Table of Contents
Advertisement
GENERAL
!
WARNING: When servicing, use only
identical replacement parts. The
use of any other part may create a hazard or
cause damage to the product.
DO NOT use solvents when cleaning plastic
parts. Plastics are susceptible to damage from
various types of commercial solvents and may
be damaged by their use. Use a clean cloth to
remove dirt, dust, oil, grease etc.
!
WARNING:
Do not allow brake fluids,
gasoline, petroleum-based products,
penetrating oils, etc. to come into contact
with plastic parts. These substances contain
chemicals that can damage, weaken or
destroy plastic.
Keep the air vents cleared of any built up dust to
prevent the motor from overheating. Remove
accumulated dust and debris regularly using a
soft DRY brush.
!
WARNING:
Use safety goggles when
using an air jet to blow dust out of the chop
saw.
DO NOT abuse power tools. Abusive practices
can damage the tool and the workpiece.
!
WARNING:
DO NOT attempt to modify
this chop saw or create accessories. Any
such alteration, modification or unintended
use is misuse and could result in a
hazardous condition leading to possible
serious injury. It will also void the warranty.
LUBRICATION
All of the bearings in this tool are lubricated with
a sufficient amount of high-grade lubricant for
the life of the unit under normal conditions.
Therefore, no further lubrication is required.
MAINTENANCE
18
Advertisement
Table of Contents
