Chapter 2 - Using The Controls And Setting The Functions; Setting The Clock - Kenwood Microwave Oven User Manual

CHAPTER 2 - USING THE CONTROLS AND SETTING THE FUNCTIONS

2.1 SETTING THE CLOCK

When the appliance is first connected to the electricity supply or after it has been without power for some time,
two dots (:) appear on the display and a beep is emitted. Press the STOP/CANCEL button (9) and 0:00 will
appear on the display.
• If you want to change the time set, press the
ted above.
• You can press the
The time will be displayed for 2 seconds.
36
To set the time, proceed as follows:
1
Press the
(The hour flashes).
2
Set the hour by rotating the
TIME ADJUST knob (8).
(The hour flashes).
3
Press the
(The minutes flash).
4
Set the minutes by rotating the
TIME ADJUST knob (8).
(The minutes flash on the
display 1)
5
Press the
(The set time is displayed).
button (2) at any moment, even when the oven is operating, to display the time.
button (2).
button (2) again.
button (2) again.
button (2) and repeat the setting procedure as instruc-