Setup; Hardware Requirements; Workplace Preparation; Lifting The Monitor - IBM 9514-BXX User's Setup Manual

Hardware Requirements

This Monitor requires a computer with a suitable on-board sub-system or Video Adapter card that can
support SXGA 1024 x 768 at 75 Hz.
Make sure the PC's video mode is set in the range of the supported screen addressability shown in the
table on page 21.

Workplace Preparation

This section gives advice
on what you should
consider before you set up your
monitor.

Lifting the Monitor

Do not support the monitor
within the screen area. The
Liquid Crystal Display is glass
and can be damaged by rough
handling or excessive pressure.
Positioning the Monitor
Choose a suitable place to position the monitor where it is not near
fluorescent desk lighting. Ensure that the furniture or equipment can support
the weight of the monitor. Allow at least 2 inches (50mm) ventilation space
around the monitor.
Height
The monitor should be positioned so that the top of the screen is slightly
below your eye level when you sit at your workstation.
Orientation
Choose a position that gives the least reflection from lights and windows,
usually at a right angle to any windows. The monitor should be positioned
directly in front of you so that you do not have to twist your body to use it. Tilt
the monitor to a comfortable viewing angle.
Hold the bottom of the screen with both hands in the positions shown.
2

Setup