3Com Impact External ISDN Modem Quick Start Instructions page 5

Configuring the 3C882 ISDN Modem Using a Macintosh Computer
7 Double-click the 3ComImpact IQ 3.0 icon to run the SPID
Wizard configuration program.
The Select Modem Port screen appears.
8 Select the port to which the 3C882 ISDN modem is
connected and then click OK .
The SPID Wizard start screen appears.
9 Click Next .
After the SPID Wizard checks the ISDN layer 1 status, and
configures the switch type, the First Telephone Number
screen appears.
10 Enter the first telephone number for your ISDN line and
then click Next .
After SPID Wizard configures the SPID for the first telephone
number, the Second Telephone Number screen appears.
If your ISDN line has a second telephone number assigned to
it, enter it here and then click Next . If it does not have a
second telephone number assigned to it, leave the field as is
and then click Done .
If you entered a second telephone number for your ISDN line,
the SPID for the second telephone number is configured.
A message box indicates that the configuration was
successful.
11 Click Done .
When the automatic configuration process is complete, the
on-line registration dialog box appears. Enter your
information and then click Register Now . After your
information is sent, the Configuration dialog box appears.
This completes the basic configuration procedure.
Refer to the User Guide for instructions regarding advanced
configuration and placing calls.
5