Advertisement
5 If you are connecting analog equipment, connect one
end of the RJ-11 connector into the RJ-11 modular jack
labeled with a telephone icon on the back of the ISDN
modem.
6 Connect the other RJ-11 end into the appropriate RJ-11
port on the analog device.
7 Connect the 3C882 ISDN modem power cable to the
9 VDC power connector on the back panel of the ISDN
modem.
8 Plug the transformer end of the power cable into a
surge-protected standard 110 VAC wall outlet.
Configuring the 3C882 ISDN Modem Using a PC
To install the 3C882 ISDN modem software:
1 Insert the 3ComImpact IQ Windows & DOS Installation
Diagnostic Utilities diskette into an available floppy drive.
2 If you are using Windows 95, select Run from the Start
menu. If you are using Windows 3.x, select Run from the File
menu. In the Run dialog box, type: a:setup.
3 Click OK .
4 Double-click the 3ComImpact IQ globe icon to run the
SPID Wizard configuration program.
A message box indicates that the SPID Wizard has started.
The dialog box for the first telephone number appears.
5 Enter the telephone number for your ISDN line.
6 Click Next .
The SPID for telephone number one is automatically
configured.
Configuring the 3C882 ISDN Modem Using a PC
3
Advertisement
