Inserting Memory Media; Removing Memory Media - Toshiba NB10 User Manual

Set the write-protect switch to the lock position, if you do not want to record
data.

Inserting memory media

The following instructions apply to all types of supported media devices. To
insert memory media, follow the steps as detailed below:
1.
2.
3.

Removing memory media

The following instructions apply to all types of supported media devices. To
remove memory media, follow the steps as detailed below:
1.
2.
3.
User's Manual
SD Card (SD memory card, SDHC memory card and SDXC memory
card)
Turn the memory media so that the contacts (metal areas) face down.
Insert the memory media into the memory media slot on the right side
of the computer.
Press the memory media gently to ensure a firm connection is made.
The memory media will be partially out of the slot.
1. Memory media slot
Make sure the memory media is oriented properly before you insert it.
If you insert the media in wrong direction, you may not be able to
remove it.
When inserting the memory media, do not touch the metal contacts.
You could expose the storage area to static electricity, which can
destroy data.
Do not turn the computer off or switch to Sleep Mode or Hibernation
Mode while files are being copied - doing so may cause data to be
lost.
Click the Desktop tile and open the Safely Remove Hardware and
Eject Media icon on the Windows Taskbar.
Select memory media.
Grasp the media and remove it.
Figure 4-8 Inserting memory media
1
2. Memory media
2
4-17