Toshiba NB10 User Manual page 43

AC adaptor
connected
AC adaptor
not
connected
DC IN/Battery indicator
Check the DC IN/Battery indicator to determine the status of the battery
pack and the power status with the AC adaptor connected. The following
indicator conditions should be noted:
Flashing amber
Amber
White
No light
If the battery pack becomes too hot while it is being charged, the charge
will stop and the DC IN/Battery indicator will go out. When the battery
pack's temperature falls to a normal range, charging will resume - this
process will occur regardless of whether the computer's power is on or off.
User's Manual
Battery fully
charged
Battery partially
charged or no
charge
Remaining
battery capacity
is above low
battery trigger
point
Remaining
battery capacity
is below low
battery trigger
point
Remaining
battery capacity
is exhausted
The battery charge is low. The AC adaptor must
be connected in order to recharge the battery.
Indicates the AC adaptor is connected and the
battery is charging.
Indicates the AC adaptor is connected and the
battery is fully charged.
Under any other conditions, the indicator does
not light.
Power on
• Operates
• No charge
• LED: white
• Operates
• Charge
• LED: amber
• Operates
• LED: off
• Operates
• LED: flashes
amber
Computer shuts
down
Power off
(no operation)
• No charge
• LED: white
• Quick charge
• LED: amber
3-12