Delayed or inadequate cleaning will permanently clog the Spray Gun.
Latex paint hardens quickly and permanently inside Spray Gun.
Air Source
a.
Never connect to an air source that
is capable of exceeding 200 psi.
Over pressurizing the tool may cause
bursting, abnormal operation,
breakage of the tool or serious injury to persons.
Use only clean, dry, regulated compressed air at
the rated pressure or within the rated pressure
range as marked on the tool. Always verify prior to
using the tool that the air source has been adjusted
to the rated air pressure or within the rated
air-pressure range.
SAVE THESE INSTRUCTIONS.
Symbol Definitions
Symbol
property or Statement
pSI
Pounds per square inch of pressure
CFM
Cubic Feet per Minute flow
Cubic Feet per Minute flow
SCFM
at standard conditions
NpT
National pipe thread, tapered
NpS
National pipe thread, straight
Page 4
NOTICE
Clean the Spray Gun IMMEDIATELY after EVERY use.
For technical questions, please call 1-888-866-5797.
b.
Never use oxygen, carbon dioxide, combustible
gases or any bottled gas as an air source
for the tool. Such gases are capable of
explosion and serious injury to persons.
Symbol
property or Statement
WARNING marking concerning
Risk of Eye Injury. Wear
ANSI-approved eye protection.
WARNING marking concerning
Risk of Respiratory Injury.
Wear NIOSH-approved respirator.
WARNING marking concerning
Risk of Explosion.
Item 47016 67181