Central Pneumatic 47016 67181 Owner's Manual & Safety Instructions

Central Pneumatic 47016 67181 Owner's Manual & Safety Instructions

20 oz. high volume, low pressure gravity feed spray gun

Advertisement

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
NOTICE
CLEAN IMMEDIATELY
Clean the Spray Gun
IMMEDIATELY after use.
Delayed or inadequate cleaning will
permanently clog the Spray Gun.
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2002 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15c

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 47016 67181 and is the answer not in the manual?

Questions and answers

Summary of Contents for Central Pneumatic 47016 67181

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
  • Page 2: Table Of Contents

    Cluttered benches and dark areas increase the while operating the tool. Distractions are risks of electric shock, fire, and injury to persons. able to result in the loss of control of the tool. Page 2 For technical questions, please call 1-888-866-5797. Item 47016 67181...
  • Page 3: Personal Safety

    Use only lubricants supplied with the by qualified repair personnel. tool or specified by the manufacturer. When servicing a tool, use only identical replacement parts. Use only authorized parts. Item 47016 67181 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4: Symbol Definitions

    Risk of Respiratory Injury. Wear NIOSH-approved respirator. Cubic Feet per Minute flow SCFM at standard conditions WARNING marking concerning Risk of Explosion. National pipe thread, tapered National pipe thread, straight Page 4 For technical questions, please call 1-888-866-5797. Item 47016 67181...
  • Page 5: Specifications

    20  –   7 0 PSI Cup Capacity 20 fl. oz. Maximum Air Pressure 70 PSI Air Consumption 6 CFM @ 40 PSI Air Inlet 1/4 IN.  –   1 8 NPS Item 47016 67181 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6: Setup

    However, it is a good safety measure to attempt to discharge the tool in a safe fashion after disconnecting to ensure that the tool is disconnected and unpowered. Page 6 For technical questions, please call 1-888-866-5797. Item 47016 67181...
  • Page 7 NOTICE Clean the Spray Gun IMMEDIATELY after EVERY use. Delayed or inadequate cleaning will permanently clog the Spray Gun. Latex paint hardens quickly and permanently inside Spray Gun. Item 47016 67181 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8 NOTICE Clean the Spray Gun IMMEDIATELY after EVERY use. Delayed or inadequate cleaning will permanently clog the Spray Gun. Latex paint hardens quickly and permanently inside Spray Gun. Page 8 For technical questions, please call 1-888-866-5797. Item 47016 67181...
  • Page 9: Operation

    Before spraying, mask nearby objects not being sprayed and lay cloths (not included) on the floors. Pattern Adjustment Trigger Knob Air Knob Air Inlet Figure C: Components and Controls Item 47016 67181 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10 Close the Fluid Knob slowly, loosen the Lock Ring and turn the Nozzle 90°. checking the pattern after each adjustment. 8. After the adjustment, tighten the Lock Ring by hand. Page 10 For technical questions, please call 1-888-866-5797. Item 47016 67181...
  • Page 11: Spraying Technique

    Figure I: Spray Gun Angle - side view Using two hands, one to steady the Cup and the other to operate the Spray Gun, aim Nozzle at the workpiece. Item 47016 67181 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12: Maintenance

    Air Supply Maintenance Every day, perform maintenance on the air supply according to the component manufacturers’ instructions. Storage Store in a dry, secure area out of reach of children. Page 12 For technical questions, please call 1-888-866-5797. Item 47016 67181...
  • Page 13 4. Worn/damaged air valve/seat. 4. Replace air valve. 5. Bent valve stem. 5. Replace valve stem. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. Item 47016 67181 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14 Nozzle are plugged. left only 3. Damaged Needle. 3. Have qualified technician replace Needle. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. Page 14 For technical questions, please call 1-888-866-5797. Item 47016 67181...
  • Page 15: Parts List And Diagram

    Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 47016 67181 For technical questions, please call 1-888-866-5797. Page 15...
  • Page 16: Warranty

    pLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.

This manual is also suitable for:

4701667181

Table of Contents

Save PDF