Getting Started; Charge Your Hiod One - HIOD One Owner's Manual

7 ( 27)

Getting started

When using your HIOD One for the first time complete the following three tasks:

1. Charge your HIOD One

Thoroughly dry the USB charging ports, the weather caps, and the surrounding area before charging
or connecting to a computer if your HIOD One has been exposed to water.
1. Connect the twin USB cables to the units as indicated.
2. Connect the single USB cables to the twin USB cable.
3. Connect the single USB cable to the charger.
4. Connect the USB plug to the charger.
5. Connect the charger to a wall socket.
6. Leave the units to charge for approximately 6 hours.
7. The flashing orange LEDs on VU and CU indicate that the units are charging. When the LEDs are
turned off, the units are fully charged.
8. Unplug the units.
NOTE! Charge the units to maximum charge before first time use.
NOTE! You cannot use HIOD One while charging.
DOC10ONE-OM-R1B