Mounting Hiod One; The Control Unit - HIOD One Owner's Manual

17 ( 27)

Mounting HIOD One

The Control Unit

Fasten the Control Unit on the handlebar. Use the thin Velcro strap included in the product box.
1. Pull the Velcro through the lower connection point with the
fastening surface away from the Control Unit. Pull until the wider
portion of the strip is adjacent to the lower connection point.
2. Pull the Velcro over the bar and through the upper connection point.
3. Attach the wider portion of the Velcro to the strip you have pulled
through the connection points. Pull hard for better fastening.
4. Attach the narrower strip on top of the wider portion to finish the
mounting. Pull hard for better fastening.
DOC10ONE-OM-R1B