The Adapter Cables For Waterproofing; The Electrostatic Discharge Protectors - HIOD One Owner's Manual

19 ( 27)

The adapter cables for waterproofing

To make sure your HIOD One fulfils the IPX7 standard of water resistance, make sure you attach the
adapter cables to the Voice Unit and keep the coverlids protecting the charging outlets on the Voice
Unit and the Control Unit tightly closed. The adapter cables can be found in the HIOD One product
box.
NOTE! Without the adapter cables between the Voice Unit and the microphone and earphones and if
the coverlids are not tightly closed it is not guaranteed that HIOD One is water resistant (IPX7
standard).

The Electrostatic Discharge protectors

Mounting the electrostatic discharge protectors on your HIOD One will give you an enhanced
protection against Electrostatic Discharge (ESD). The ESD protectors can be found in the HIOD One
product box. Pull the protectors over the 3.5 mm socket of the adapter cables to the Voice Unit so the
protectors cover the metal before jacking in the microphone and the earphones. During normal usage
of HIOD One, for instance while cycling, the risk for ESD is minimal. ESD can in rare cases lead to that
the units turn off in which case you have to turn them on again. It is recommended to use the ESD
protectors if you are in any way uncertain.
NOTE! Without the electrostatic discharge protectors it is not guaranteed that HIOD One is fully ESD
protected.
DOC10ONE-OM-R1B