Pairing With Many Friends; Using Hiod Talk; Mobile; Pairing With Your Mobile Phone - HIOD One Owner's Manual

The display indicates when user 1 has found the user 2 and your HIOD Ones are paired. When you add
a friend they will appear under the HIOD Talk menu in Setup. Exit Setup by pressing and holding Mode.
NOTE! If the pairing process is not completed within two minutes turn off both HIODs and start the
pairing process again.

Pairing with many friends

Repeat the steps above for each new pairing. You can pair with a maximum of five other HIOD One
friends and talk with them one at a time. For removing friends see "Setup: HIOD Talk" on page 15.

Using HIOD Talk

1. Enter the HIOD Talk mode (toggle between modes with Mode).
2. Toggle to the friend you want to connect to (toggle with Toggle next/Toggle previous).
3. Press MFB to establish a HIOD Talk link with your HIOD friend.
4. Press MFB to disconnect the HIOD Talk link.
NOTE! Your HIOD friend does need to answer, the HIOD Talk link will establish automatically when
you press the MFB. If your friend is busy or out of range, your HIOD One will indicate that the link
cannot be established, se the "search: connection fail" icon on page 25.

Mobile

The Mobile mode enables you to control your mobile phone calls from your HIOD One. Pair your
mobile phone and your HIOD One, place your mobile in a safe place and control it from your HIOD One
Control Unit on the handlebar.

Pairing with your mobile phone

1. Enter Setup (press and hold Mode).
2. Toggle to Mobile and select with MFB.
3. Toggle to Pair and select with MFB.
4. Activate Bluetooth on your mobile phone and choose your HIOD One.
5. When the phone locates your HIOD One enter pin-code 0000 (if needed).
6. The display indicates when HIOD One is connected to the mobile phone. HIOD One and your
mobile phone are now paired.
7. Exit Setup (press and hold Mode).
11 ( 27)
DOC10ONE-OM-R1B