Olivetti d-COPIA 3500MF Operation Manual page 63

Auto-IP Settings
Select whether or not to use Auto-IP. The default setting is On.
Use the procedure below.
AppleTalk Setup
Select the Apple Talk network connection. The default setting is On.
Refer to AppleTalk on page 9-95 about the procedures.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Next]
of TCP/IP Setting.
3
Press [Change] of TCP/IP.
4
Press [On] and then press [OK].
5
Press [Change] of IPv4.
6
Press [Auto-IP].
7
Press [On] or [Off] of Auto-IP and then press [OK].
8
After changing the setting, restart the network from
the system menu, or turn the machine OFF and
then ON.
For detailed information on restarting the network,
refer to Restart Network on page 9-101.
2-15
Preparation before Use
2