Olivetti d-COPIA 3500MF Operation Manual page 316

Border Erase to Back Page
Select the Border Erase Method for Back Page of a sheet. The table below shows the available settings.
Item
Same as Front Page
Do Not Erase
NOTE:
Refer to page 4-18 and page 6-26 for Border Erase.
Use the procedure below to specify the border erase setting for the back side of the original page.
1
Press the System Menu key.
2
Press [Common Settings], [
Page.
3
Press [Same as Front Page] or [Do Not Erase].
4
Press [OK].
Margin Default
Set the default margin. The table below shows the measurement ranges that can be set.
Input units
Inch
Metric
Use the procedure below to set the default margin width.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Use the [+] or [-] to enter the margin widths for Left/Right and Top/Bottom.
You can use the numeric keys to enter the number directly.
4
Press [OK].
Auto Image Rotation
Select the default Auto Image Rotation setting. The table below shows the available settings.
Item
Off
On
Border Erase performed in the same setting as the front page
No Border Erase performed on the back page
], [Next] of Function Defaults, [
-0.75 to 0.75" (in 0.01" increments)
-18 mm to 18 mm (in 1 mm increments)
], [Next] of Function Defaults, [
No Auto Image Rotation performed.
Auto Image Rotation performed.
9-22
Default Setting (System Menu)
Description
] and then [Change] of Border Erase to Back
Range
] and then [Change] of Margin Default.
Description