Olivetti d-COPIA 3500MF Operation Manual page 62

Hide thumbs Also See for d-COPIA 3500MF:
Table of Contents

Advertisement

DHCP Settings
Select whether or not to use the DHCP server. The default setting is On.
Use the procedure below.
Bonjour Settings
Select whether or not to use Bonjour. The default setting is Off.
Refer to Bonjour Settings on page 9-91 about the procedures.
13
Check if all the address entries are correct and
press [OK].
14
After changing the setting, restart the network from
the system menu, or turn the machine OFF and
then ON.
For detailed information on restarting the network,
refer to Restart Network on page 9-101.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Next]
of TCP/IP Setting.
3
Press [Change] of TCP/IP.
4
Press [On] and then press [OK].
5
Press [Change] of IPv4.
6
Press [DHCP].
7
Press [On] or [Off] of DHCP and then press [OK].
8
After changing the setting, restart the network from
the system menu, or turn the machine OFF and
then ON.
For detailed information on restarting the network,
refer to Restart Network on page 9-101.
2-14
Preparation before Use

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D-copia 5500mfD-copia 4500mf

Table of Contents