Calibration
Calibrate the device to ensure consistency with the original grayscale. If you find that the grayscale is not
improved by this calibration, use tone curve adjustment (see page 9-68).
1
Press the System Menu key.
2
Press [
], [Adjustment/Maintenance], [
3
Press [Execute]. Calibration begins.
4
Press [OK] after Calibration is complete.
Developer Refresh
When the printing is too light or incomplete, even though there is enough toner, refresh the developer.
1
Press the System Menu key.
2
Press [
], [Adjustment/Maintenance], [
3
Press [Start]. Developer Refresh begins.
NOTE:
Waiting time may be longer when the toner is refilled during developer refresh.
4
Press [OK] after Developer Refresh is complete.
] and then [Next] of Calibration.
] and then [Next] of Developer Refresh.
9-71
Default Setting (System Menu)
9