Removing Computer From Case - PRG air filter User Manual

5
T M : R M
ROUBLESHOOTING AND AINTENANCE OUTINE AINTENANCE

Removing Computer from Case

The Macintosh® G5 computer can be removed from the case to be cleaned or replaced. Two
configurations of the Mbox Extreme case exist: one case contains two mounting brackets that attach to
the computer and the other contains only foam encasing the computer.
To remove Mac G5 computer with mounting brackets:
Step 1. At rear of case, disconnect all cables from Mac G5 computer.
Step 2. At front of case, remove four 8mm mounting bracket screws.
Step 3. At rear of case, remove four 8mm mounting bracket screws.
Step 4. Carefully slide Mac G5 computer through front of case.
To remove Mac G5 computer with foam-only mounting:
Step 1. At rear of case, disconnect all cables from Mac G5 computer.
Step 2. Carefully slide Mac G5 computer through front of case.
47
0 2. 9 8 0 0. 0 0 01