System Connection Procedure - PRG air filter User Manual

M E ™ M
BOX XTREME EDIA

System Connection Procedure

Once the case is set up and in place, connect to your control and video output devices.
To connect to the system:
Step 1. For DMX512 controllers:
a. At Data I/O unit, connect console or DMX512 controller to DMX connector as required.
Step 2. For Art-Net consoles:
a. At Data I/O unit, connect console to any Ethernet connector
b. If desired, connect additional Ethernet devices (such as a media server, network switch
1 4
S U M
ERVER SER ANUAL
Figure 2-4: Connecting DMX512 Control Devices
or dimmer rack) to additional Ethernet ports provided by the Ethernet Hub
Figure 2-5: Connecting Additional Devices to Ethernet Hub
DATA I/O
DMX
ETHERNET
ETHERNET HUB
HUB POWER
(Figure 2-4).
(Figure 2-5).
02.9800.0001