General; Basic Operations; Adjusting The Clock; Changing The Initial Settings - Kenwood KDC-X797 Quick Start Manual

3. GENERAL

3.1 Basic operations

Turning the power ON/OFF
Press and hold [8SRC] to turn the power on.
Press and hold [8SRC] to turn the power off.
Selecting a source
Press [8SRC] repeatedly to select your desired
source.
("SIRIUS XM") Á HD Radio ("HD RADIO")
SiriusXM* 1
Á USB or iPod* ("USB" or "iPod") Á Pandora*
2 3
("PANDORA") Á iHeartRadio* ("IHEARTRADIO") Á
3
("AHA") Á Bluetooth audio ("BT AUDIO") Á
Aha* 3
("CD") Á Auxiliary input* ("AUX") Á Standby
CD* 2 3
("STANDBY")
* This source can be selected only when connected to an
1
optional SiriusXM Vehicle Connect Tuner.
* This source can be selected only when it can be played.
2
* 3 "PANDORA", "IHEARTRADIO", "AHA", and "AUX" sources are
not selectable when not in use. See <3.3 Changing the
initial settings> (page 11).
Adjusting the volume
Turn the volume knob to adjust the sound
volume.
Switching display
Press [SCRL DISP] repeatedly to select an
information.
Press and hold [SCRL DISP] to scroll the current
display information.
USB terminal
1
Open the cover.
2
Connect a USB device or iPod.
CA-U1EX or KCA-iP102 (optional accessories) is
recommended to connect a USB device or iPod.
Auxiliary input
1
Open the cover.
2
Connect a portable audio device using a
stereo mini-plug (3.5 mm ø) audio cable.
10
|
KDC-X797/ KDC-BT755HD

3.2 Adjusting the clock

1
Press the volume knob to enter Function
mode.
"FUNCTION" appears.
2
Turn the volume knob to select SETTINGS ,
then press the knob.
3
Turn the volume knob to select CLOCK , then
press the knob.
4
Turn the volume knob to select CLOCK
ADJUST , then press the knob.
5
Turn the volume knob to adjust the hour, then
press to enter minute adjustment.
6
Turn the volume knob to adjust the minute,
then press the knob.
- Press [E] / [F] to move between the hour
and minute adjustment.
7
Press and hold [6] to exit.
Setting the clock
1
Press the volume knob to enter Function
mode.
"FUNCTION" appears.
2
Turn the volume knob to select SETTINGS ,
then press the knob.
3
Turn the volume knob to select CLOCK , then
press the knob.
4
Turn the volume knob to select TIME SYNC
then press the knob.
5
Turn the volume knob to select ON or OFF ,
then press the knob.
"ON": Synchronizes the unit's time to the Radio
Data Broadcast System station time.
"OFF": Cancels the usage of Radio Data Broadcast
System station time.
6
Press and hold [6] to exit.

3.3 Changing the initial settings

You can change an initial setting item(s) according
to your viewing or listening preference
1
Press [8SRC] to select
2
Press the volume knob to enter Function
mode.
"FUNCTION" appears.
3
Turn the volume knob to select
then press the knob.
4
Turn the volume knob to select a desired
setting item, then press the knob.
- See table below for selection.
- Press [ 6 ] to return to the previous item.
5
Press and hold [6] to exit.
Item Description
PRESET TYPE NORMAL: Memorizes one station or channel for each
preset button in each band (FM1/ FM2/ FM3/ AM/
SXM1/ SXM2/ SXM3/ SXM4). ;
MIX: Memorizes one station or channel for each preset
button regardless of the selected band (FM1/ FM2/
FM3/ AM/ SXM1/ SXM2/ SXM3/ SXM4).
KEY BEEP ON/ OFF: Activates/deactivates tone emission when
a key is pressed.
PANDORA SRC ON/ OFF: Select whether to display Pandora during
source selection.
IHEART SRC ON/ OFF: Select whether to display iHeartRadio
during source selection.
AHA SRC ON/ OFF: Select whether to display aha during source
selection.
BUILT-IN AUX ON: Enables AUX in source selection. ;
,
OFF: Disables.
CD READ "1": Automatically distinguishes between audio file
disc and music CD. ; "2": Forces to play as a music CD.
No sound can be heard if an audio file disc is played.
SP SELECT OFF / 5/4 / 6×9/6 / OEM: Select the speaker size for
optimum performance.
F/W UPDATE
Upgrades the firmware.
YES: Starts upgrading the firmware. ;
NO: Does not upgrade firmware.
For details on how to update the firmware, see:
kenwood.com/cs/ce/
(Colored text: Factory setting)

3.4 Setting the demonstration mode

1
Press the volume knob to enter Function
mode.
STANDBY .
"FUNCTION" appears.
2
Turn the volume knob to select
then press the knob.
3
Turn the volume knob to select
INITIAL SET ,
If "ON" is selected, display demonstration starts if no
operation is done for about 20 seconds.
4
Press and hold [6] to exit.
www.
DEMO MODE ,
ON or OFF .
11
|
English