Plena Booster Amplifier | Installation and Operating Manual |
3
Installation in rack
0 dB
-6 dB
-20 dB
Po we
r
1
Figure 3.1
The booster amplifier is delivered for tabletop use, but you can mount it in a 19" rack using the brackets supplied
with the unit. In case of rack mounting, you must:
•
remove the 4 feet from the bottom of the unit. Without the feet, the LBB1930 and LBB1935 are 2U high and the
LBB1938 is 3U high.
•
leave 1U empty rack space above the LBB1930 or LBB1935 to ensure sufficient air flow.
•
ensure that the ambient temperature of the unit in the rack does not exceed 55 °C.
In case of rack mounting, removal of the top cover of a booster amplifier is allowed to improve the ventilation. In
such a case, always use the shimming washers that come with the brackets and make sure to comply with the safety
instructions. The amplifier has a built-in temperature controlled fan for reliable operation at high output power for a
prolonged time. If the internal temperature reaches a critical limit due to insufficient air flow, overload or an
excessive ambient temperature, the overheat protection will be activated, causing the amplifier to switch to standby
mode.
Bosch Security Systems | 2003-09 | 3922 988 92983en
Installation in rack
LBB1930
LBB1935
1
0 dB
-6 dB
-20 dB
Po we
r
1
LBB1938
Ba tte
ry
Ov erh
ea t
1
en | 11