System Board - Hectronic H6052 Hardware Reference Manual

System Board

1. Make sure the add-in card is seated securely in the expansion slot. If the add-in card
is loose, power off the system, re-install the card and power up the system.
2. Check the jumper settings to ensure that the jumpers are properly set.
3. Verify that all memory modules are seated securely into the memory sockets.
4. Make sure the memory modules are in the correct locations.
5. If the board fails to function, place the board on a flat surface and seat all socketed
components. Gently press each component into the socket.
6. If you made changes to the BIOS settings, re-enter setup and load the BIOS defaults.
H6052 Hardware Reference Guide
61