Hectronic H6052 Hardware Reference Manual page 41

H6052 Hardware Reference Guide
Super IO Configuration
This section is used to configure the I/O functions supported by the onboard Super I/O chip.
Restore AC Power Loss
Power Off
When power returns after an AC power failure, the system's power is off. You must press the
Power button to power-on the system.
Power On
When power returns after an AC power failure, the system will automatically power-on.
Last State
When power returns after an AC power failure, the system will return to the state where you
left off before power failure occurs. If the system's power is off when AC power failure
occurs, it will remain off when power returns. If the system's power is on when AC power
failure occurs, the system will power-on when power returns.
41