Hectronic H6052 Hardware Reference Manual page 34

H6052 Hardware Reference Guide
ACPI Power Management Configuration
This section is used to configure the ACPI power management.
Enable ACPI Auto Configuration
Enables or disables the BIOS ACPI auto configuration.
ACPI Sleep State
Selects the highest ACPI sleep state that the system will enter when the Suspend button is
pressed. The options are Suspend Disabled, S1 (CPU Stop Clock) and S3 (Suspend to
RAM).
Resume by PME/Ring
When Enabled, the system uses the PCI PME (Power Management Event) signal (PCI,
PCIE, LAN) to remotely wake up the system.
Resume by PS2 KB (S1, S3)
Uses the PS/2 keyboard to power-on the system.
Resume by PS2 MS (S1, S3)
Uses the PS/2 mouse to power-on the system.
Resume by RTC Alarm
Enabled
When Enabled, you can set the date and time you would like the Soft Power Down (Soft-Off)
PC to power-on. However, if the system is being accessed by incoming calls or the network
(Resume On Ring/LAN) prior to the alarm date and time, the system will give priority to the
incoming calls or network.
Disabled
Disables the automatic power-on function. (default)
34