Cutting Height Adjustment - Ferris Hydro Cut Series Operator's Manual

Operation

CUTTING HEIGHT ADJUSTMENT

The cutting height can be adjusted within two different
ranges. The High Range covers 4-1/2" - 2-1/2" (11,4
- 6,4cm) and the Low Range covers 3-1/2" - 1-1/2" (8,9 -
3,8cm). See Figure 3 for deck height indicator.
Before adjusting the cutting height, you must first
determine the average cutting height. Depending on the
range you plan to use, it may be necessary to adjust the
deck lift pivot locations and the pulley spacer positions.
To Adjust the Cutting Range:
See your authorized dealer.
To Adjust the Cutting Height:
Turn the crank handle clockwise to raise the mower
deck or counterclockwise to lower the mower deck. See
Figure 4.
Figure 3. Deck Height Indicator
Figure 4. Cutting Height Adjustment
14