Dear Customer, CONTENTS page we thank you for the purchase of the PT-6200. Please read this instruc- 1 Unpacking and Checking tion manual carefully before using the PT-6200. You will learn about the 1.1 Supplied Accessories different features and functions of your new handheld transceiver.
1 UNPACKING AND CHECKING 3) Do not incinerate or apply heat the battery! Unpack the transceiver carefully. We recommend that you identify the If the insulator is melted, the gas release vent or safety function is items listed in the following table before discarding the packing mate- damaged, or the electrolyte is ignited, the battery may generate heat rial.
2.2 Battery Care Tips tery charger. Plug the adapter into an AC The transceiver is equipped with a TEAM Ni-MH battery pack. An wall outlet and the indicator turns green. optional Li-ion battery pack is available. The following tips help you to get the best battery performance and longest battery life.
9 Microphone/Speaker Jacks Notes: For connecting external Microphone/Speaker. Only use the original TEAM accessories for the PT- 6200. Optional accessories, e.g. ear- / microphone, are not included in the scope of delivery.
5 Basic Operation 6.2 Key Lock Switch On 1) Press and hold the side button set as key lock for 1 second to acti- Switch on the radio by turning the Power/Volume switch clockwise vate or inactivate key lock. While Key Lock is active, the following until a click is heard, then the radio will be in the state of stand by and keys are locked: you will hear a beep if the dealer has set it.
4) You can select a channel to make a call by pressing the PTT button 5) Press PTT to store the setting. After a beep, the radio announces during anytime of scanning. new VOX gain level. 5) Press again the button set as Scan or Scan + Temporarily Delete to 6) Turn off the radio, and turn it on again, and then VOX function is end scanning.
10.8 DTMF 10.2 Battery Saving The dealer can turn on or turn off this function by programming. Only The dealer can turn on or turn off this function by programming. If the when the radio receives programmed DTMF code (3~10 digits), the battery saving function is on, 10 seconds after the radio doesn't squelch will be activated.
332 g ( with antenna and battery pack ) Transmitting Beginning/Ending signaling is used to join in or discon- nect from some repeater and calling system. model: PT-6200 VHF Transmitting Beginning signaling is used to join in the conventional Frequency Range: 136 - 174 MHz repeater and its relevant auxiliary equipments.
13 Programmed Settings Wij bedanken u voor de aanschaf van de PT-6200. We vragen u voor het Model number: Serial number: gebruik van de portofoon de handleiding goed door te lezen, om de pas- sende functionaliteit van de PT6200 te leren en om de levensduur te ver- 1) Channel List lengen.
Need help?
Do you have a question about the PT-6200 and is the answer not in the manual?
Questions and answers