Specifications - Amprobe AM-220 User Manual

Specifications

GENERAL SPECIFICATIONS
Display:
Range control:
Polarity:
Zero adjustment:
Overrange indication:
Low battery indication:
Data hold:
Relative measurement:
Auto Power Off:
Safety standards:
Operating environment:
Storage environment:
Power supply:
Dimension:
Weight:
ELECTRICAL SPECIFICATIONS
Accuracies are ±(% of reading + number in last digit) at 23 ± 5°C, °< 75% RH
DC VOLTAGE
Range
400mV
4V
40V
400V
600V
Overload protection: 600V DC or AC RMS
Impedance: 10MW, More than 100MW on 400mV range
LCD with a max. reading of 4000
Auto range & Manual range control
Automatic negative polarity indication
Automatic
The "OL" or "-OL" display
Display " " sign
Display " " sign
Display " " sign
Display " " sign. After 10 minutes without switching modes
or pressing a key the meter will switch to standby mode. Press
any key or switch selector switch to exit standby mode. To dis-
able auto power off, press and hold SELECT key while rotating
the selector switch from off position.
EMC/LVD. The meter is up to the standards of EN61010-
1:2001; Double Insulation, Pollution Degree 2, Overvoltage
Category III-600V.
Temperature 0°C to 40°C (32°F to104°F)
Humidity °< 80% RH
Temperature -20°C to 60°C (-4°F to140°F)
Humidity °< 90% RH
2x1.5V "AA" batteries
156(H) x 86(W) x 38(D) mm (6.1" x 3.4" x 1.5")
Approx. 260g (9.2 oz.) including battery
Accuracy
± ( 0.5%+2 )
± ( 0.8%+3 )
3
Resolution
0.1mV
1mV
10mV
100mV
1V