Installation; Safety Wire; Safety Wire Plate For Ceiling - Panasonic WV-SP509 Installation Manual

Installation

Connect the safety wire
The following is an example of safety wire connection.
IMPORTANT:
• Be sure to install the safety wire. Ask your dealer for installation.
For mounting on ceiling
z
Remove the tripod mount base on the top
of the camera.
x
Align the tripod mount base with the safety
wire plate for ceiling (accessory) and attach
them to the camera with the mounting
screws.
IMPORTANT:
• Use the detached mounting screws to attach the tripod mount base. When using different
length screws, it may damage the camera or cause the camera to fall.
(Recommended tightening torque: 0.39 N·m {0.29 lbf·ft})
c
Engage the safety wires with the wire engaging holes respectively.
Wire engaging hole
Pass the ring part of the safety wire
through the wire engaging hole.

Safety wire

(accessory)
Mounting screws
Tripod mount
base
Safety wire plate
for ceiling
(accessory)
Wire engaging hole
21