The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
5.
Select the Port Triggering radio button.
6.
Click the Add Service button.
7.
In the Service Name field, type a descriptive service name.
8.
From the Service User list, select a user option:
•
Any (the default) allows any computer on the Internet to use this service.
•
Single address restricts the service to a particular computer. You must enter the IP
address of the computer to which you want to grant access.
9.
From the Service Type list, select a service.
If you are not sure, select TCP/UDP.
10.
In the Triggering Port field, enter the number of the outbound traffic port that will open the
inbound ports.
AC1750 WiFi Cable Modem Router
Specify Internet Port Settings
88