Battery Charging - TAG Heuer Start clock User Manual

14. Battery Charging

Each Start Clock has a Lithium-Polymer battery with a capacity of 10 Ah.
For charging the battery, we suggest that you to use our TAG Heuer charger.
Using another model other than the TAG Heuer charger may damage the device.
To charge the internal battery, turn off the system.
o
Connect the charger to the AC source
o
Plug the charger into the device
o
The red LED will be on while charging
o
IMPORTANT:
Always charge the device at a temperature between 32° F (0° C) and 86° F (30°C)
FOR YOUR SAFETY
Batteries will not explode or be a fire HAZARD as a result of excessive charge or
discharge or if a battery is installed with incorrect polarity.
Opening a Start Clock and changing the battery by a non-authorized person is strictly
forbidden and will void the warranty!
The red LED is on during the charging process, when fully charged, the red LED shuts down and the
green LED will turn on.
It takes approximately 5 hours fully charge a completely discharged battery.
Never connect the terminals of the battery in short-circuit.
Avoid keeping the battery pack fully charged or completely discharged for a long period. Doing so
reduces the lifespan of the battery. In the case of prolonged non-utilization of the battery pack, it is
necessary keep the system in a dry room, and at room temperature.
21