Timing Mode (Menu 2); Ptb Sequential (Setting "00"); Split: (Setting "01") - TAG Heuer Start clock User Manual

7. Timing Mode (Menu 2)

The Start Clock has 2 Timing Modes
- Select menu "2_" and validated with
- The 2 Digit Display
- Using the arrow keys, select your timing mode
This menu is not available during a Run
7.1.

PTB Sequential (setting "00")

Sequential recording of time-of-Day on 2 channels
This mode does not calculate Net Times.
In this mode, bib number entry is not possible.
7.2.

SPLIT: (setting "01")

Sequential recording of time-of-Day on 2 channels and allows you to enter bib number.
This mode does not calculate Net Times.
In SPLIT Mode, you have the possibility to connect an External Keyboard (Ref: HL 650-20) on the
AUX 1 (selection of the target = PC). Hence you will be able to introduce the bib number.
If the start clock is running with a program, you can assign the bib number with the correct time.
Between Count Down sequences, the
Check carefully the Numbering setting (Manual or Automatic), chapter 9.3
It is not necessary to run a program to display the bib's number.
But you have to be into a Run to see this bib number.
◄┘:
will show you the actual setting
2 Digit Display
(00 or 01)
will show the bib number.
11