Synchro (Menu 1); Manual Synchro (Menu 10); Gps Synchro (Menu 11) - TAG Heuer Start clock User Manual

6. Synchro (Menu 1)

Synchronizing to a new time-of-day (it is possible to exit this menu anytime with the "F" button).
This menu is not available during a Run.
6.1.

Manual Synchro (Menu 10)

Allows you to enter a new time of the day and date manually, and synchronize the system with a
manual input signal (input 1 or Input 2) or with the Start / Stop / Reset button.
Once you select "10" from the menu, you will enter:
- Hours (RED disk), then confirm with
- Minutes (Yellow disk), then confirm with
- Day (Orange disk), then confirm with
- Month (Blue disk), then confirm with
- Year (Purple disk), then confirm with
- Synchronise the start clock through either external input (1 – 2) or press the
button
Important :
The date (day, month and year) is important information, especially when linking your start clock
with other timing devices (Chronoprinter 540 or Minitimer 440).
If doing so, the Time of the day and Date must be identical between devices!
6.2.

GPS Synchro (Menu 11)

The Start Clock HL 940 has its own integrated GPS antenna.
If the signal of the GPS is not strong enough, you have to connect the external GPS Antenna.
Once from the menu "11" is selected:
- The 2 needles will be placed automatically at 12:00
- On the 2 Digit Display
- The number showing on the display tells you how many satellites the HL 940 has found
- As soon the HL 940 is able to determinate the time and date, the needle will be placed in the
correct position, awaiting the Top Minute signal from the satellite
Important :
It is possible to escape from this menu at anytime, by pressing and holding the
Start / Stop / Reset
If you perform this operation, you will then have to synchronize manually.
It is possible to select the GPS internal or external with the
► External GPS: sign «
► Internal GPS: sign «
PLEASE NOTE:
UTC TIME
The time provided by the satellites is GPS (terrestrial hours) of a certain number of seconds
(15 seconds since January 2009).
This information is transmitted by satellites every 12,5 mins.
It remains in the GPS almanac, this allows fast synchronization.
◄┘
◄┘
◄┘
◄┘
◄┘
you will see "+/-" symbols switching alternately
button for 5 seconds.
+ » blinking
- » blinking
"Start / Stop /
/ ▼) arrows
(▲
Reset"
10