Table of Contents
Advertisement
Setting the Number of Power / Data Supply Ports
For KiNET version 2 only, the Num Ports setting in ColorDial Pro should equal
the number of power / data supply ports with connected lights. (To ensure optimal
operation, lights should be connected to power / data supply ports in sequence, starting
with port 1 — ports 1 through 5 on an sPDS480ca, for example.)
To set the number of power / data supply ports:
►
1.
In Menu Mode, select System Settings > Setup Lights > Num Ports.
2.
Turn the rotary dial to select the total number of ports you want, then press the
rotary dial to confirm your selection.
Firmware Updates
ColorDial Pro firmware is periodically updated to improve device performance
and functionality.
To determine the current firmware version:
►
1.
In Menu Mode, select System Settings > Information. The current firmware version
is listed in the F/W: field.
2.
Press the rotary dial to exit.
To update the ColorDial firmware:
►
Visit www.colorkinetics.com/support/downloads/ to download the latest firmware
▪
image, a firmware updater program, and instructions.
ColorDial Pro and Ethernet Controller Keypad
You can install ColorDial Pro in a secure area to limit
access and avoid accidental interruption of scene playback
by connecting a Philips Color Kinetics Ethernet Controller
Keypad to a PoE port on your Ethernet switch. You can
use the Ethernet Controller Keypad to trigger stored
ColorDial Pro scenes, adjust fixture brightness and
turn connected fixtures off and on. Ethernet Controller
Keypad must have the latest firmware installed.
For more details, download the ColorDial
E
Pro Product Guide from www.colorkinetics/ls/
controllers/colordialpro/
Philips Color Kinetics
3 Burlington Woods Drive
Burlington, Massachusetts 01803 USA
Tel 888.387.5742
Tel 617.423.9999
Fax 617.423.9998
www.colorkinetics.com
Ethernet
PoE switch
Ethernet
Data Enabler
Copyright © 2009 Philips Solid-State Lighting Solutions, Inc. All rights reserved.
Chromacore, Chromasic, CK, the CK logo, Color Kinetics, the Color Kinetics logo, ColorBlast, ColorBlaze,
ColorBurst, ColorGraze, ColorPlay, ColorReach, DIMand, EssentialWhite, eW, iColor, iColor Cove, IntelliWhite,
iW, iPlayer, Light Without Limits, Optibin, and Powercore are either registered trademarks or trademarks of Philips
Solid-State Lighting Solutions, Inc. in the United States and/or other countries. All other brand or product names
are trademarks or registered trademarks of their respective owners. Due to continuous improvements and
innovations, specifications may change without notice.
Num Ports
1
Total number ports
Click to save
Ethernet Controller
Keypad
ColorDial Pro
ColorBlast Powercore
fixtures
PUB-000243-01 R01 09-09
Advertisement
Table of Contents
