Table of Contents
Advertisement
Working with Scenes
A scene consists of a built-in effect and user-editable effect settings. ColorDial Pro has
eight scenes, 1 – 8. When you select a scene, it automatically displays on all connected
lighting fixtures.
You can edit the currently playing scene by changing its assigned effect and associated
effect settings. You can preserve your changes by saving them as a scene.
To select a scene:
►
In Playback Mode, press the faceplate button to step through the stored scenes
▪
1 – 8, in order.
In Menu Mode, select Select Scene, and select the desired scene.
▪
To change the current scene's brightness (0% – 100%):
►
In Playback Mode, turn the rotary dial.
▪
To turn off lights and to resume playback of the current scene:
►
In Playback Mode, press and quickly release the rotary dial to pause current scene
▪
playback. The screen displays OFF and the brightness is set to 0%.
Press and quickly release the rotary dial again to resume current scene playback
▪
at the previous brightness level, or turn the rotary dial clockwise to increase the
brightness from 0%.
To edit a scene:
►
1.
Select the scene you want to edit.
2.
In Menu Mode, select Edit Current.
3.
To change the scene's effect, select Change Effect, then select the effect type.
4.
To change an effect setting, select the setting and use the rotary dial to modify
the setting as desired. Press the rotary dial to confirm your changes.
5.
See "Changing Effect Settings" below for specific instructions for each setting.
6.
Repeat step 4 for each effect setting you want to change.
Select Exit until you return to Playback Mode.
7.
To save the current scene:
►
1.
Make any desired changes to the current scene's effect and effect settings.
2.
In Menu Mode, select Save As Scene.
3.
Select a scene location, 1 through 8, to which to save the current scene. The LCD
screen displays a Stored message to confirm.
Changing Effect Settings
Effect settings differ depending on the selected effect. For example, you can change the
speed and direction of the Color Wash effect, or the temperature of the White effect.
To edit an effect setting:
►
1.
In Menu Mode, select Edit Current. Change the effect type, if desired.
2.
Select the setting you want to change from the effect type's Edit menu
3.
Turn the rotary dial to modify the setting as desired, then press the rotary dial to
confirm your selection.
4
ColorDial Pro
User Guide
Selecting a scene automatically
E
begins scene playback.
Scene 4
Rainbow Wash
Brightness
80%
OFF
Brightness
0%
Edit Fixed Color
Change Effect
Hue
Saturation
Exit
Editing a scene changes the
E
properties of the currently playing
scene. Changes are not preserved until
you save the scene.
Keep in mind that saving the
E
current scene replaces the scene
previously assigned to that location.
See the table on the next page for
E
descriptions of the six built-in ColorDial
effects and their related settings.
Advertisement
Table of Contents
